BMW BC Button Not Working: Quick Troubleshooting Guide

Understanding BMW BC Button and Its Function

The BMW BC button is a multifunctional feature found in most BMW vehicles. It acts as a bridge between the driver and the vehicle’s onboard computer, allowing for easy access, understanding, and management of various information about the car’s performance and status.

The BC button is typically located on the end of the turn signal stalk or on the steering wheel, depending on the model. When the driver presses the button, they can cycle through various functions and settings. These may include fuel consumption, average speed, distance traveled, and more. The information provided by the BC button helps drivers stay informed about their driving habits and manage their vehicle more effectively.

Many BMW owners may experience situations where the BC button is not working as intended. In such cases, the first step is to check the button and its connections for any visible damage. If there is no visible damage, the issue may be with the car’s software or a faulty sensor. It is crucial to address any problems with the BC button promptly to ensure the driver has access to vital information on their vehicle’s performance and status.

For those who wish to personalize their driving experience further, the BC button also allows the driver to switch between different drive modes. These modes impact the vehicle’s performance, fuel efficiency, and handling. By understanding the various settings and functionalities of the BC button, BMW drivers can fully utilize this feature to enhance their driving experience.

Common Issues with BMW BC Button

When experiencing issues with the BMW BC button not working, there are a few common causes to consider. Understanding these issues will help in identifying the problem and provide guidance for possible solutions.

One common issue faced by BMW owners is a broken wire within the BC button system. Over time, with continuous use and vibration, the wires inside the button assembly can become frayed or disconnected. In some cases, broken wires were found to be either blue or brown. When inspecting the BC button, make sure to disconnect the battery to avoid any electrical mishaps.

Another issue that may arise is related to the vehicle’s software bugs. Sometimes, these bugs can interfere with the proper functioning of the BC button. As seen in one forum, a right-hand scroller stopped working for audio and other functions, and the BC button stopped functioning randomly, possibly due to a glitch in the software.

Besides broken wires and software bugs, the BC button may also stop working due to hardware issues. The button itself, its mechanism, or the internal contacts may wear out over time, resulting in intermittent functionality or complete failure. For example, one BMW owner found that their BC button only worked when the signal was engaged to the left, which might indicate a broken contact or malfunctioning hardware inside the button assembly.

When troubleshooting the BMW BC button, it is essential to consider these common issues. Broken wires, software bugs, and hardware malfunctions are the primary culprits. In many cases, a repair or replacement may be necessary to restore the proper functionality of the BC button. Always consult a qualified professional or BMW dealer for further assistance if needed.

How to Test the BMW BC Button

To test the BMW BC button, follow these simple steps to ensure it is functioning properly. First, locate the BC button on your BMW, which is typically found on the left side of the steering wheel, near the turn signal stalk.

Begin by turning off the car’s ignition and placing the keys in the off position. Press and hold the trip reset button, located near the instrument cluster. While continuing to hold the trip reset button, turn the ignition key to the accessory position, which is one click away from the engine being turned on. At this point, the instrument cluster should display a series of parameters.

Now, release the trip reset button and use the BC button to scroll through the various parameters displayed on the instrument cluster. These parameters include the time, outside temperature, average speed, fuel consumption, and more. The BC button should allow you to move through each parameter seamlessly. If it fails to do so, there might be an issue with the button or the vehicle’s electrical system.

In some cases, steering wheel controls may stop working temporarily, but may become functional again after driving for a short period. This could be an indication of a connection issue within the steering wheel control system.

If the BC button is still not responding, it is advisable to seek professional assistance or consult your local BMW service center. They will be able to diagnose and resolve the issue with the appropriate tools and expertise.

Potential Solutions for BMW BC Button Not Working

One common issue that BMW owners may encounter is the BC button not working properly. This can be quite frustrating, as the BC button is used to access essential information, such as trip statistics and service reminders. However, there are various solutions that can be tried to fix the problem.

Firstly, it is essential to check the OBC fuse as a blown fuse can render the BC button inoperable. If the fuse is still intact, the issue may be due to broken wires inside the arm. To address this problem, use a hex key to remove the steering wheel for easier access to the arm. Once the arm is removed, inspect and resolder any broken wires (either blue or brown) to fix the connection.

Another possible solution is to reboot the iDrive system by pressing the volume/power button for 30 seconds. This reboot method can temporarily address the unresponsive BC button and has been known to work in some situations, but it may not be a permanent solution if the underlying issue is not addressed.

In certain cases, the BC button and other nearby buttons like the auto high beam button may only work under specific conditions, such as when the turn signal is engaged in a particular direction. This unusual behavior might indicate a broken wire or contact in the stalk area. To fix this issue, consider consulting a specialized BMW technician or electrician for further assistance.

Additionally, some older models might experience issues with other buttons near the BC button, such as the up/down button. This can cause unexpected changes and cycling through menu options. This issue can be addressed by either taking the car to a specialized BMW technician or following the previous methods mentioned for fixing broken wires and connections.

In summary, potential solutions for a malfunctioning BMW BC button include checking and replacing the OBC fuse, repairing broken wires, rebooting the iDrive system, and consulting a specialized technician for assistance. Adopting a confident, knowledgeable, and neutral tone, these solutions can be attempted by the car owner or a professional to ensure the proper functioning of the BC button in any BMW vehicle.

Software and Fuse Issues

BMW vehicles are equipped with advanced onboard computers that control various systems including the electronics and functions of the car. One common issue that owners may face is the BC button not working. This problem could stem from software glitches or fuse-related issues.

When dealing with software issues, a possible cause for the BC button malfunction is a lack of compatibility with recent updates. Vehicle software updates are released periodically to enhance the performance and functionality of the vehicle. However, there may be instances where an update doesn’t work seamlessly with the car’s existing software. In such cases, a quick reset of the onboard computer system could resolve the issue. Rebooting iDrive, for example, can be done by pressing and holding the volume/power button for 30 seconds 1.

On the other hand, fuse-related issues might be the culprit if the BC button is still not working despite software resets. The vehicle has multiple fuses that regulate electricity for various components, and a damaged or blown fuse can lead to certain functions not working properly. It’s essential to identify the correct fuse and check for any anomalies. If the fuse is damaged, a replacement is necessary. Consult the vehicle’s owner’s manual for the specific location and type of fuse related to the BC button.

Regular maintenance checks and updates can prevent certain software and fuse issues, allowing vehicle owners to detect any problems early and avoid disruptions in using their BC button and other functions. Remember to keep up-to-date with software updates and schedules to maintain the smooth functioning of your BMW’s onboard computer and electronics.

Consideration of X5 Model

The BMW X5 is a popular luxury SUV, known for its performance and advanced features. However, some owners have reported issues with the BC button not functioning properly. The BC button is responsible for operating the on-board computer, allowing drivers to access information like fuel consumption, trip mileage, and more.

One instance of this issue can be found on a Bimmerpost forum, where the user experienced an unresponsive BC button in their X5 model. A potential solution mentioned in the same thread is to reboot the iDrive system by pressing the volume/power button for 30 seconds.

In another Bimmerpost discussion, multiple X5 owners experienced random issues with the BC button stopping to work. Though specific solutions were not provided in the thread, this indicates that the issue can be a common occurrence among X5 models.

X5 owners who encounter this issue can try some common troubleshooting steps. Firstly, making sure that the vehicle’s software is up-to-date is essential. While the unresponsive BC button issue might not necessarily be resolved by software updates, keeping your vehicle software current is a vital maintenance step.

Another potential solution is to inspect components related to the BC button. For example, on a Bimmerfest BMW Forum, a user found a broken wire inside the button’s arm, which could be fixed by soldering the wire back together. However, before attempting any repair work, be sure to disconnect the battery and take necessary precautions to avoid damage to the vehicle or voiding the warranty.

It’s important for X5 owners to be aware of this potential issue with the BC button and to learn how to troubleshoot and resolve it. By maintaining the vehicle regularly, keeping up with software updates, and seeking assistance from professionals when necessary, drivers can continue to enjoy the advanced features of their BMW X5 confidently and safely.

BMW BC Button and Steering Wheel

The BMW BC button, located on the turn signal lever or steering wheel controls, stands for “Board Computer,” which is part of the car’s On-Board Computer system. This button allows drivers to access and manage various vehicle-related functions, such as fuel consumption, average speed, and remaining distance until the fuel tank is empty.

When the BC button stops functioning, it could be due to several reasons, such as broken wires, faulty connections, or a malfunctioning turn stalk. One common issue experienced by BMW owners is broken wires inside the steering wheel controls arm. To fix this problem, you may need a Hex key to remove the steering wheel, giving you easy access to the arm and its components. Then, you can resolder the damaged wires to make the BC button functional again. Remember always to disconnect the battery first when working with the airbag or other electrical components of the steering wheel.

BMW steering wheel controls consist of various buttons, including the BC button, that allow drivers to manage audio settings, cruise control, and heated steering wheel functions without taking their hands off the wheel. The right side of the steering wheel generally contains audio and voice control buttons, while the left side houses cruise control and other driving assistance features.

The turn stalk or turn signal lever is another essential component of the BMW’s steering wheel system, responsible for initiating the left or right turn signals. The BC button is often found on this lever, making it convenient for drivers to access while driving. However, this also means that any problem with the turn stalk, such as a faulty connection, could affect the functionality of the BC button.

In conclusion, BMW’s BC button and steering wheel play a crucial role in providing drivers with easy access to essential vehicle functions. When the BC button fails to work, potential causes could be broken wires, a malfunctioning turn stalk, or connections within the steering wheel controls. Repairing these issues can help restore full functionality and improve your driving experience.

When to Consult Dealer and Relevant Forums

In situations where your BMW’s BC button stops working, it’s essential to consult a trusted dealer or seek help from experienced users on relevant forums. Since this issue may be related to various factors such as electrical faults, software updates, or broken wires, professional guidance is crucial for an appropriate diagnosis and resolution.

Reaching out to a BMW dealer should be your first approach to identify the root cause of the BC button problem. Authorized dealers have certified technicians who can examine the vehicle, carry out necessary tests, and perform any required maintenance. Moreover, the dealer may be aware of recent software changes or updates that could influence the button’s functionality.

Apart from engaging with dealers, exploring BMW forums can offer a wealth of useful information. These forums are populated by knowledgeable members and experienced users who can provide valuable insights into the common BC button issues. Among the many reliable forums where you can find assistance are,,,,,,,, and

These forums often feature dedicated threads discussing BC button issues, where users share their experiences and solutions. For instance, has a thread on fixing broken wires inside the button’s arm, while addresses problems after an 11/2022 software update.

When utilizing forums, it’s crucial to consider the specific model of your BMW, as various threads might cater to specific series such as the 3-Series, 4-Series, or X5. Keep in mind that although forums can provide valuable information, always consult a professional before making any changes or repairs to your vehicle.

In conclusion, when experiencing a non-functional BC button on your BMW, it is important to consult with your dealer and make use of relevant forums. Through a combination of professional guidance and shared experiences from knowledgeable BMW enthusiasts, you can better understand the underlying issue and hopefully get it resolved efficiently.

Understanding BMW’s iDrive and Reboot Options

BMW’s iDrive is an advanced infotainment system featured in many of their vehicles. It offers various functionalities, including navigation, multimedia, communication, and vehicle settings. However, sometimes the iDrive system may become unresponsive or the BC button might not work as expected.

In such cases, rebooting the iDrive system is often the best solution. To reboot the iDrive system, one should press and hold the volume control button on the audio control unit for at least 30 seconds1. This will restart the iDrive and reset its settings. Note that this procedure should be performed only when the car is parked safely, with the iDrive system in “radio-ready” state.

If the BC button remains unresponsive even after rebooting the iDrive system, it might indicate an issue with the wiring or software. In some cases, broken wires within the steering wheel assembly can lead to the malfunction of the BC button[^3^]. To fix this, the steering wheel needs to be disassembled, and the wires should be soldered back together. Always make sure to disconnect the battery before performing any repairs on the car’s electrical system, especially when working with the airbag.

Occasionally, a software update may be required to resolve ongoing iDrive or BC button issues. BMW routinely releases firmware updates to enhance the performance and features of their vehicles. It is a good practice to keep the iDrive system updated to the latest firmware version.

In conclusion, BMW’s iDrive system is an integral part of the vehicle’s functionality, and any issues with it should be promptly addressed. Rebooting the system or checking the wiring connections can resolve many common problems. Regular software updates are also crucial to maintaining optimal performance.

Bmw Bc Button Connection and Repair

The BMW BC button is an essential part of the vehicle’s on-board computer system. It allows drivers to access and control various features such as fuel efficiency, average speed, and trip information. Occasionally, the BC button might become unresponsive or stop functioning altogether. In such cases, understanding the connections and performing the necessary repairs is crucial to restore its functionality.

One common issue that may cause the BC button to not work is a broken wire within the arm or the connector. In order to repair this, one needs to first disconnect the battery to avoid any accidental electrical issues. Next, use a hex key to remove the steering wheel, which will make it easier to access the arm and the connectors housing the BC button. Once the arm is removed, carefully inspect the wires, specifically the blue or brown ones, as mentioned in this forum.

In case of a broken wire, a simple solution is to resolder it to re-establish the connection. If the issue persists, it could be due to a faulty connector, which may require replacement. Additionally, there may be instances where the problem can be resolved by rebooting the iDrive system by pressing and holding the volume/power button for 30 seconds.

In some cases, the BC button might only work when the signal is engaged to the left, which may indicate a broken wire or contact within the stalk area. Refer to this discussion for more insights. If the issue is still unresolved, it is advisable to consult a professional mechanic or BMW expert for assistance, as they possess the necessary expertise and tools to diagnose and repair the problem.

While the repair process for a BMW BC button may seem daunting at first, following the correct steps and exercising caution can ensure a successful repair. Ensuring that the connections are intact and the button is functioning properly will help you regain full control of your vehicle’s on-board computer system and enjoy a seamless driving experience.

Legal Information and Site Policies

This section outlines the legal information and site policies regarding the BMW BC button not working issue. It is important for users to be aware of the associated legal aspects, including logo, trademark, and property rights, as well as privacy policies, terms of service, DMCA policy, and the personal data portal.

The BMW logo and trademarks are the property of BMW AG, a German multinational corporation that manufactures luxury vehicles and motorcycles. Any use of the BMW logo, trademark, or other intellectual property should adhere to BMW’s guidelines and licensing agreements. Unauthorized use of these properties may infringe on BMW’s rights and result in legal action.

Regarding privacy policies, users should be mindful of their online activities when discussing the BMW BC button issue. Personal information, such as email addresses and location data, should be kept private to protect the user’s privacy. Websites and forums that cover the topic may have their own privacy policies; it is advised to review these policies before engaging in discussions or providing personal information.

When using online resources to assist in resolving the BMW BC button issue, users should abide by the terms of service provided by the websites, forums, or online communities they access. These terms outline the rules and guidelines that users must follow to ensure a positive and helpful experience for all users involved.

In the case of copyrighted materials related to BMW vehicles or the BC button, users must respect the Digital Millennium Copyright Act (DMCA) policy. This policy protects the rights of copyright holders and prohibits unauthorized use, reproduction, or distribution of copyrighted materials. Sharing or distributing copyrighted information or materials related to BMW’s vehicles or systems without proper authorization could have legal consequences.

Lastly, users should be aware of the personal data portal, which allows individuals to access, check, and manage their personal information that may have been collected by companies or organizations. When discussing the BMW BC button issue, users should ensure their personal data protection rights as stated by the General Data Protection Regulation (GDPR) or other relevant data protection laws.

In conclusion, understanding and adhering to the legal information and site policies related to the BMW BC button issue can help protect users and ensure a safe, productive, and respectful online environment.


  1. 2

Georg Meier

BMW technician since 1996. I began my automotive journey in 1993 as an apprentice mechanic at Automag, the world's oldest BMW dealership in Munich. With years of experience and dedication, I garnered a wealth of knowledge about the intricacies of BMW and MINI vehicles. The love/hate relationship with the brand led me to found BIMMERIST where I share expertise and insights with fellow enthusiasts.

Post navigation

Leave a Reply

Your email address will not be published. Required fields are marked *